State of the Art from Chemical-Physical Treatment Facilities for Fluid Hazardous Wastes Disposal
Chemical-physical treatment facilities for hazardous fluid wastes represents an important disposal path in Austria. Therefore, two studies (IAE in order for the province of Styria, the Federal Environment Agency) were carried out, which deals with the potential waste input, facility capacities, prevailing configurations and the difference between state of the art and best available techniques in this kind of waste disposal.
Existing facilities could be distinguished by the treated waste in inorganic (CPA), organic (CPO) and combined (CPAO) systems. Depending on the system capacity it can be further divided into non-IPPC and IPPC facilities, according to the IPPC directive. Therefore plant operators have to implement the state of the art or the best available techniques for the treatment.
In Austria, are currently more than 30 physical-chemical treatment facilities for organic and/or inorganic contaminated waste in operation, which together have a maximum treatment capacity of approximately 800,000 tons per year. These are 24 classic, two mobile and seven other chemical-physical treatment plants. Furthermore, one for the chemical-physical waste treatment also the solidification and immobilization of sludge.
An allocation of different kinds of waste only through the national and european waste catalogue to physico-chemical treatment facilities of CP systems is partially difficult. The consistency and composition (e.g. solid content and concentration of heavy metals) are main parameters for the treatment technologies in this facility types. According to legal requirements resulting from the emissions (waste gas, waste water) during the treatment, analysis of the input waste and of the reaction control during treatment as soon as a monitoring of the chemical reaction products are of exceptional importance.
Depending on the composition of the assumed wastes different aims are persuaded through the physico-chemical treatment by the plant operator. These aims could also vary in their priorities. Possible objectives could be:
- Separating of the aqueous phase (increasing the dry substance),
- Separation of recyclable material phase (e.g. oil),
- Concentration of pollutants/immobilization and
- Detoxification trough redox reactions.
| Copyright: | © Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben | |
| Quelle: | Depotech 2012 (November 2012) | |
| Seiten: | 4 | |
| Autor: | Dipl.-Ing. Dr. Hannes Menapace  Peter Seppele A. Kofler | |
| Die Bibliothek und die Kaufoptionen sind umgezogen zu https://library.wasteculture.com Bereits erworbene Artikel können weiterhin über myASK abgerufen werden. | ||
Diese Fachartikel könnten Sie auch interessieren:
Anwendung von FOST zur Annotierung von Metallverbundabfällen
© Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (12/2024)
In diesem Paper wird ein halbautomatischer Video-Annotation-Ansatz vorgestellt, der den Annotierungsaufwand im Bereich des maschinellen Sehens erheblich reduziert. Das entwickelte Tool, genannt „Fast Object Segmentation and Tracking Tool“ (FOST), wurde speziell für das KIRAMET-Projekt zur Segmentierung und Verfolgung von Metallverbundabfällen entwickelt.
Technische Möglichkeiten der Abfallvermeidung in der Stahlproduktion
© Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
Bei der Stahlproduktion fallen verfahrensbedingt große Mengen an Nebenprodukten und Abfällen wie Stahlwerksschlacken, Filterstäube und Gichtgas
schlämme an. Hohe Anteile dieser Stoffströme werden aufgrund ihrer Zusammensetzung immer noch deponiert, obwohl sie ein hohes Wertstoffpotential aufweisen. An der Bundesanstalt für Materialforschung und -prüfung (BAM) werden Verfahren untersucht und entwickelt, welche eine Verwertung und Kreislaufführung dieser Materialströme ermöglichen.
Material Flow Analysis of Specific Nanomaterials in C&D Waste in Japan
© Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2014)
The objective of this study is to clarify the material flow of specific nanomaterials with focus on construction materials to deviate its release scenarios for the end-of-life phase. The waste stream of construction and demolition (C&D) waste is very challenging because it is generated by both households and industry. Furthermore, the volume of C&D waste in Japan or in Austria is very high. Regarding nanotoxicity, the content of engineered nanomaterials (ENMs) in paints for construction materials is considerable. Chen et al. (2008) pointed out that SiO2 nanoparticles can easily be airborne because of their size. Kaegi et al. (2008 & 2010) have also shown that the nano-fraction of the whitening pigment (TiO2) and nano-Ag was released into surface water under real weather conditions from facade coatings.
Feeding of Refuse Derived Fuels in the Cement Industry
© Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2014)
In the energy-intensive industries of cement production, the use of refuse derived fuels (EBS) is in common since several years especially to decrease costs.
LNAPL/DNAPL Phase Skimming on the Contaminated Site „Kokerei Linz”
© Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2014)
The coke oven plant started production in 1942 and was rebuilt after the extensive damage towards the end of World War II. For the production of by-products tar and crude benzene (light oil, coal) were distilled on site. Due to the effects of war and associated with the destruction of various parts of the coking plant, there were massive contaminations of the soil at the operational facilities. Based on these contaminations in soil there is still a signifi cant input of pollutants into the groundwater.
