| ORBIT Conferences | |
| Orbit 2014 | |
| Orbit 2012 | |
| Orbit 2008 | |
Digestate and compost quality - case studies at anaerobic disgestion plants with the BTA Process
The key for the successful anaerobic digestion of biowaste and/or municipal solid waste is an efficient removal of the impurities before the digestion step. This is not only indispensable for the reliability of the process and therefore the plant availability, but furthermore for the quality of the produced digestate or final compost. With the existing
developments within the EU, the quality of the digestate / compost has become a focus of attention.
Further Authors:
P. Bolzano - Biotec Sistemi s.r.l.
J. Del’haye - IVVO
• In Castelleone (Italy), where biowaste and commercial waste are digested as co-substrates together with agricultural residues, the produced digestate is spread on the fields of nearby farms
• In the Biowaste Methanization Plant Kirchstockach (Germany) the dewatered digestate is mixed with green waste to produce quality compost
• In the Biowaste Methanization Plant Ieper (Belgium) the dewatered digestate is further processed to produce quality compost
• In the MBT Plant Valorlis (Portugal) the dewatered digestate is further processed to produce final (stabilized) compost
Finally, analysis carried out during the start-up and the operation tests for the MBT Plant Valorlis (Portugal), which treats Municipal Solid Waste, showed that the parameters for the content of physical impurities (content of plastics and of stones, glass splitters) are met. These are examples which prove that it is possible to obtain a quality product out of the digestate without an extensive refining step but a simple screening for the partial recovery of structure material, demonstrating the advantage of an efficient removal of impurities in the upfront of the anaerobic digestion.
| Copyright: | © European Compost Network ECN e.V. | |
| Quelle: | Orbit 2012 (Juni 2012) | |
| Seiten: | 7 | |
| Preis inkl. MwSt.: | € 7,00 | |
| Autor: | Rita Nimmrichter  Dipl. Ing. Stephan H. Schulte Ulrich Niefnecker | |
| Artikel weiterleiten | In den Warenkorb legen
| Artikel kommentieren |
Diese Fachartikel könnten Sie auch interessieren:
Umweltbildung mit #wirfuerbio
© Witzenhausen-Institut für Abfall, Umwelt und Energie GmbH (4/2023)
#wirfuerbio ist die bundesweite Kampagne der kommunalen Abfallwirtschaft zur Reduzierung von Störstoffen im Bioabfall. Mit einer starken Bandbreite unterschiedlicher crossmedialer Kommunikationsmittel und Maßnahmen verändert sich das Verhalten der Biotonnenbenutzer. Die Störstoffquote sinkt um mehr als 50 Prozent. Die Kampagne weist einen neuen Weg in der Umweltbildung. Mit der Abfallbox und der SpieleApp „#wirfuerbio das Sortierspiel“ wird Kreislaufwirtschaft in Form von Spaß und Spiel erlebbar. Der Beitrag zeigt, wie Abfallbox und Spiele-App didaktisch funktionieren und ein Bewusstsein für Kreislaufwirtschaft und Mülltrennung entwickeln.
Feldversuche zum Abbauverhalten von kompostierbaren Vorsammelhilfen in der technischen Kompostierung
© Witzenhausen-Institut für Abfall, Umwelt und Energie GmbH (4/2023)
Kompostierbare Vorsammelhilfen (zertifiziert nach EN 13432 und „OK Compost Home“) wurden zwei Versuchsmieten in „realitätsnahen“ Mengen zugesetzt, wobei eine theoretische Befüllung von 1 bis 1,2 kg Bioabfall pro Vorsammelhilfe erreicht wurde. Die Vorsammelhilfen fragmentierten bereits in den ersten beiden Rottewochen und verschwanden zwischen der zweiten und der vierten Woche in der Fraktion > 10 mm vollständig. Geringe Partikelanzahlen vom Typ der untersuchten Vorsammelhilfen konnten in der Fraktion 0,63 bis 0,2 mm in der Anlage 1 nach neun Wochen und in Anlage 2 nach zwölf Wochen nachgewiesen werden, wodurch gezeigt werden konnte, dass die untersuchten Vorsammelhilfen während der ordnungsgemäßen Kompostierung kaum zu Mikrokunststoffen fragmentiert.
Post-treatment of Composting Leachate by Photocatalytic Process
© Wasteconsult International (5/2015)
In this study the capability of UV-ZnO photocatalytic process as a post Treatment method for composting leachate was examined at laboratory scale and in batch mode. The effect of some factors such as initial pH, oxidant concentration, light intensity and reaction time on the removal of organic load and color of leachate were investigated. Biological pre-treated leachate samples were collected from the effluent of leachate treatment facility of a composting plant in north of Iran. A Plexiglas column with 110 mm inner diameter and 300 mm height were used to conduct experiments. UVC lamps with different power levels in the range of 8-40W at the centre of the column were used as the source of irradiation. Based on the results of experiments, after 180 minutes of Radiation with 32W UVC lamps in pH 11 and in the presence of 1g.L-1 of slurry ZnO, maximum COD and color removal were achieved to be 57% and 67%, respectively.
Organic waste composts as potential fertilisers for cereal prodktion in developing merket
© European Compost Network ECN e.V. (6/2012)
Production of waste compost is well established in many European countries. In developing markets, however, the waste composts are not fully accepted as conventional organic fertilisers. The nutrient value of composts must be studied locally. The aim of the study was to investigate the potential fertilisation value of two composts for cereal production.
Multi-component heat and mass transport model for composting process: Experimental validation
© European Compost Network ECN e.V. (6/2012)
Composting consists in an aerobic process where the organic matter from wastes is biodegraded and converted into a stable granular material called compost. Even if composting is considered to be based on natural phenomenon, it is governed by very complex mechanisms, involving many parameters such as quality and accessibility of the nutriments
for micro-organisms, local oxygen content, temperature of the medium, pH, moisture content, and so on (Mustin, 1987, Diaz et al., 2007;). These parameters directly affect biodegradation kinetics. Moreover, they are interdependent and impacted by the operating conditions, which make difficult the understanding of the process.
