Residual municipal waste composition analysis – New methods for Czech waste management

Relevant information about MW composition and proper forecasting of MW composition is crucial for relevant technical and economical modelling and business planning in the field of waste management. These include techno-economical models of MW treatment units, e.g. sorting line, transfer station, energy recovery, waste collection and transport or a regional waste collection and treatment system modelling (Kropáč et al. 2018) and complex business models concerning specific investments in waste management. In this context, there is a project under the Ministry of Environment of the Czech Republic.

Relevant and comparable information about municipal waste composition is essential for waste management modelling and planning at all territorial administration levels. Relevant information of the municipal waste composition and quality forecasts of the future composition are crucial for the development of relevant models and plans in the field of waste management, e.g. techno-economic models of MW treatment units (sorting line, transfer station, energy recovery or waste collection system modelling) and also complex business models (previously presented Flow Task Tool) concerning specific investments in waste management.


In the European Union, the European Commission seeks to support a vision of the circular economy, as summarized in the Circular Economy Package from the European Commission (2015). Developments in EU waste management are heading towards the unified European Reference Model on Waste (Eunomia Research & Consulting 2015). This situation will affect the development of new methodologies for municipal waste composition analyses in individual European Union Member States. Therefore, there is a project under the Ministry of Environment of the Czech Republic, leading to a proposal for a new Czech certified methodology. Brno University of Technology, Institute of Process Engineering, is the coordinator of this project. The aim is to provide a methodology that provides basic data for complex statistical processing and enables relevant forecasting of the development of municipal waste composition.



Copyright: © Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben
Quelle: Recy & Depotech 2020 (November 2020)
Seiten: 4
Preis inkl. MwSt.: € 2,00
Autor: Jiří Kropáč
J. Gregor
Dr. Martin Pavlas

Artikel weiterleiten In den Warenkorb legen Artikel kommentieren


Diese Fachartikel könnten Sie auch interessieren:

Sortiertechnologien in der Abfallwirtschaft
© TK Verlag - Fachverlag für Kreislaufwirtschaft (3/2010)
Ein umfassendes Programm von Sortiertechnologien ermöglicht eine Optimierung der Aufbereitung

Development of local municipal solid waste management in the Western Transdanubia region of Hungary
© Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
Hungarian municipal solid wastes (MSW) management has developed tremendously over the past 15 years. More than 3,000 landfills and dumps had been closed, just to mention one improvement. However, still, lots of work is necessary to accomplish the EU’s ambitious aim of decreasing landfilling and increasing recycling and composting.

Tex2Mat: The recycling of towels and laundry made from PET and cotton
© Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
The project “Tex2Mat” was a cooperation between companies working in the field of recycling or textiles and universities specializing in the field of polymer engineering and recycling. There were two polymers (PET and PA) examined and the whole project divided into two subprojects.

Packaging recycling in EU member states – requirements from the circular economy package
© Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
The EU has established concrete recycling targets for packaging waste for 2025 and 2030. Furthermore, the methodology for calculating the corresponding recycling rates has been amended. The new and stricter calculation methodology will potentially lead to decreases of the current rates. This will be particularly the case for plastic packaging, where denkstatt calculated a gap far above 10 % compared to smaller decreases (> 2 %) to be expected for glass or steel packaging.

Optimierte Vorzerkleinerung gemischter Gewerbeabfälle auf Basis empirischer Modelle
© Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
In der mechanischen Aufbereitung gemischter Gewerbeabfälle stellen Vorzerkleinerer für gewöhnlich den ersten Verfahrensschritt dar und sorgen nicht nur für den nötigen Aufschluss, sondern wirken auch als primäres Dosierag-gregat. Entsprechend groß ist ihr Einfluss auf das Verhalten des Gesamtprozesses. Aufgrund der hohen Variabilität der Gewerbeabfälle erscheint die Gewinnung theo-retischer Modelle nicht sinnvoll, um solche Vorzerkleinerer zu optimieren, da die nö-tigen Informationen über das Material für solche Modelle in der Praxis nicht wirt-schaftlich gewonnen werden können. Zugleich erfordert die Ermittlung signifikanter empirischer Modelle den Aufwand von viel Arbeit und Geld und wurde daher bisher für die Vorzerkleinerung gemischter Gewerbeabfälle noch nicht gemacht. Diese Arbeit gibt einen Überblick sowohl über die Forschungstätigkeiten bezüglich der Datenqualität aufgrund der Probenahme bei Zerkleinerungsversuchen mit Gewerbeabfällen, als auch über Arbeiten zur Beeinflussung und potentiellen Optimierung der Zerkleinerung hinsichtlich Durchsatzverhalten, Energieverbrauch und Materialqualität mittels einstellbarer Parameter. Abschließend werden erste Überlegungen und Forschungen zur dynamischen Prozessführung der Vorzerkleinerung vorgestellt.

Name:

Passwort:

 Angemeldet bleiben

Passwort vergessen?