The circular packaging design guideline and holistic sustainability assessment in circular economy

The FH Campus Wien Circular Packaging Design Guideline provide recommendations for circular design for the whole supply chain. Circular design is a necessary prerequisite to achieve the goals of the European Circular Economy Package which requires full recyclability of packaging by 2030. Circular packaging should re-duce resource consumption and environmental impacts of packaging. The assessment of packaging sustainability requires the calculation of direct and indirect environmental impacts and circularity at the same time. A method for holistic sustainability assessment of packaging has been proposed by FH Campus Wien and developed in an ECR-working group (Efficient Consumer Response) with the participation of a number of companies along the whole supply chain (brand owners, retailers, packaging manufacturers and packaging systems).

The European Union tries to transform its economy towards circularity. This was initiated by adoption of the Circular Economy Package which sets goals such as full re-cyclability or re-usability for all packaging put on the market till 2030 as well as requiring increased recycling quotas of packaging and a 50 % reduction of food waste by 2050. The goals are ambitious and represent a challenge for most EU-countries. In Austria only 25 % of plastic packaging is recycled at the moment, this has be to doubled to 50 % by 2025. Furthermore a significant amount of packaging at the Austrian market can not be considered as recyclable with the current state of the collection and recycling infrastructure.

In order to achieve higher material recycling rates packaging design has to conform to a circular packaging design standard to improve its (future) recyclability. Further-more to close the cycle secondary raw materials have to be available at a quality that enables full substitution for virgin materials. The Circular Packaging Design Guideline created by FH Campus Wien (FH Campus Wien, 2020) aims to provide recommendations for the circular design of packaging systems, and addresses actors along the entire value chain. It is harmonized with international guidelines, but takes care of country-specific collection and recycling infrastructures. At the moment the guideline is applicable to Austria, Germany and the Netherlands. The Guideline is updated twice a year and amended in response to changes in collection, sorting and recycling technologies, as well as material developments.

The FH Campus Wien Circular Packaging Design guideline and the Packaging Cock-pit which enables a holistic assessment of packaging sustainability comprising direct and indirect environmental impacts and circularity are attempts to provide tools for the whole packaging supply chain.




Copyright: © Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben
Quelle: Recy & Depotech 2020 (November 2020)
Seiten: 2
Preis inkl. MwSt.: € 1,00
Autor: Manfred Tacker
Ulla Gürlich
Dipl.-Ing. Bernhard Wohner

Artikel weiterleiten In den Warenkorb legen Artikel kommentieren


Diese Fachartikel könnten Sie auch interessieren:

Reporting of food waste in the EU – Results of current estimates in Germany
© Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
In February 2019, the German Federal Cabinet adopted the 'National Strategy for Reducing Food Waste', setting a framework for the future direction of this initiative. Among other things, it stipulated that an inter-ministerial "Indicator 12.3 Working Group" should prepare the data bases and methods for nationwide balancing of food waste generation (baseline). Based on existing 2015 data, this status quo analysis will be used as a starting point to agree on milestones for the respective sectors.

Kreislaufwirtschaft in der Steiermark – zukunftsweisende Ansätze auf Landesebene
© Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
Das Land Steiermark hat sich mit dem Landes-Abfallwirtschaftsplan Steiermark 2019 (Winter 2019) dem Weg zur ressourceneffizienten Kreislaufwirtschaft verschrieben. Er definiert als übergeordnete Vision den Wandel zur Kreislaufwirtschaft bis zum Jahr 2050 und legt in diesem Sinne konkrete Strategien und Ziele für die nächsten Jahre fest. Dieser Weg erfordert eine Entkopplung des Wirtschaftswachstums vom Ressourcenverbrauch. Anstelle der bisher in vielen Bereichen noch immer vorherrschenden linearen Produktions- und Nutzungsketten Primärrohstoffentnahme, Produktion, Nut-zung, Entsorgung) muss eine möglichst lange und werterhaltende Nutzung von Produkten und Rohstoffen im Mittelpunkt stehen. Die gesetzlichen Grundlagen dafür wurden bereits mit der Einführung der fünfstufigen Abfallhierarchie in der europäischen Abfallrahmenrichtlinie 2008 geschaffen.

Wertstoffhof 2020 - Neuorientierung von Wertstoffhöfen
© ia GmbH - Wissensmanagement und Ingenieurleistungen (4/2015)
Im Jahr 2014, zwanzig Jahre nach dem durch das Bayerische Staatsministerium für Landesentwicklung und Umweltfragen organisierten Wettbewerb „Der vorbildliche Wertstoffhof“, ist es sicher angebracht, sich dem Thema erneut zuzuwenden. Was ist aus den prämierten Wertstoffhöfen der Preisträger in den jeweiligen Clustern geworden? Wie hat sich das System grundsätzlich entwickelt? Wo geht es hin, wenn man die gesellschaftlichen Anforderungen aus demografischer Entwicklung, Ressourcenschutz und Klimarelevanz betrachtet?

Environmental-economic impact assessment of business models in the Austrian waste economy
© Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
The dynamic macroeconomic one-region and multi-sector model WIFO.DYNK (dynamic new-Keynesian) was adapted to model the employment and value-added impacts of the Austrian waste economy in this respect. It is based on the most recent input-output tables of Statistics Austria.

Erfahrungen mit der biologischen Abbaubarkeit von kompostierbaren Kaffeekapseln
© Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
In Österreich kommen verstärkt Kaffeekapseln auf den Markt, die als „kompostierbar“ bzw. „biologisch abbaubar“ gekennzeichneten werden. Diese Entwicklung wird von Konsumenten als positiv wahrgenommen, ist jedoch aus abfallwirtschaftlicher und umwelttechnischer Sicht als kritisch zu betrachten. Denn in bisherigen Studien (van der Zee & Molenveld 2020; Rameder 2018; Shrestha et al. 2020), war die Desintegration der zumeist aus PLA bestehenden Kapseln in Labor-versuchen und in der Praxis nach den Anforderungen der EN 13432 nicht in ausrei-chendem Maße gegeben. Die bisherigen Erkenntnisse werden durch die eigenen Ergebnisse der experimentellen Untersuchungen an vier am österreichischen Markt erhältlichen „kompostierbaren“ Kaffeekapseln nur bestätigt. Erfahrungen der österreichischen Abfallwirtschaftsverbände zu dieser Thematik stützen im Wesentlichen die Erkenntnis, dass die derzeitige Entwicklung in Richtung biologisch abbaubare Kunststoffe für das Produkt Kaffeekapsel nach dem derzeitigen Stand der Erkenntnisse und Erfahrungen nicht sinnvoll erscheint.

Name:

Passwort:

 Angemeldet bleiben

Passwort vergessen?

 
Leichtweiß-Institut
Physikalische und biologische
Aufbereitungs- und Behandlungs-
technologien, TU Braunschweig

ecovio® -
Erster Kunststoff der
BASF auf Basis nach-
wachsender Rohstoffe