Thermal Waste Treatment Plant Spittelau – New Construction to the Existing Plant –
The thermal waste treatment plant Spittelau is steeped in history and tradition. It is one out of four municipal solid waste incinerations plants in Vienna. The plant was built from 1969 until 1971 for the purpose of thermal utilization of municipal waste and household-type commercial waste as well as energy supply of the new General Hospital Vienna two kilometres away via district heating. The plant was equipped with two hot-water boilers to ensure heat supply at all times. Although it is located in the town-centre of Vienna its architectural structure did not differ significantly from the traditional plant structure.
After only six years the plant had utilized one million tonnes of waste. Throughout the following years, pipeline construction over long distances intensified and by 1985 a closed circular pipeline for heating supply had been built around the entire inner city district of Vienna. Among many others, the parliament, the Vienna Burgtheater and the Vienna City Hall, were the first customers of the company Heizbetriebe Wien. The number of supplied buildings increased steadily and the technical plant was further enlarged and adapted to the state-of-the-art. Until today, the pipeline system has been provided with hot water supply from waste incineration plants such as WIP Flötzersteig, hazardous waste incineration plant Simmeringer Haide, WIP Pfaffenau, other decentralised plants – Arsenal, Kagran, Leopoldau, Inzersdorf – as well as the cogeneration of the larger power plant Simmering and power plant Donaustadt units.
| Copyright: | © TK Verlag - Fachverlag für Kreislaufwirtschaft | |
| Quelle: | Waste Management, Volume 4 (November 2014) | |
| Seiten: | 10 | |
| Preis inkl. MwSt.: | € 0,00 | |
| Autor: | Dr.-Ing. Frank Schumacher  Dipl.-Ing. Dr. Philipp Krobath Ing. Erich Pawelka Ing. Ulrich Ponweiser Dipl.-Ing. Martin Höbler | |
| Artikel weiterleiten | Artikel kostenfrei anzeigen | Artikel kommentieren |
Diese Fachartikel könnten Sie auch interessieren:
Thermische Abfallbehandlungsanlage Spittelau – Neubau im Bestand –
© TK Verlag - Fachverlag für Kreislaufwirtschaft (1/2014)
Die thermische Abfallbehandlungsanlage Spittelau ist eine von vier Hausmüllverbrennungsanlagen in Wien und hat eine lange und traditionsreiche Geschichte. Sie wurde in den Jahren 1969 bis 1971 mit dem Hauptziel der Verwertung von Hausmüll und hausmüllähnlichen Abfällen sowie der Versorgung des rund zwei Kilometer entfernten Allgemeinen Krankenhauses der Stadt Wien mit Fernwärme errichtet. Neben dem Anlagenteil mit der thermischen Abfallbehandlung, sind zur Ausfallsicherheit Heißwasserkessel installiert. Mitten in der Stadt gelegen, unterschied sich der Baukörper damals kaum von einem anderen Kraftwerksbau.
Development of local municipal solid waste management in the Western Transdanubia region of Hungary
© Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
Hungarian municipal solid wastes (MSW) management has developed tremendously over the past 15 years. More than 3,000 landfills and dumps had been closed, just to mention one improvement. However, still, lots of work is necessary to accomplish the EU’s ambitious aim of decreasing landfilling and increasing recycling and composting.
Die neue Wirbelschichtverbrennungsanlage der Norske Skog Bruck GmbH
© Lehrstuhl für Abfallverwertungstechnik und Abfallwirtschaft der Montanuniversität Leoben (11/2020)
Am österreichischen Standort in Bruck a.d. Mur des norwegischen Papierkonzerns Norske Skog entsteht eine neue Wirbelschichtverbrennungsanlage für Papierrejecte, Ersatzbrennstoffe und Klärschlamm. Die Kapazität beträgt 160.000 t/Jahr.
Thermal Waste Treatment Plant Spittelau – New Construction to the Existing Plant –
© TK Verlag - Fachverlag für Kreislaufwirtschaft (12/2015)
The thermal waste treatment plant Spittelau is steeped in history and tradition. It is one out of four municipal solid waste incinerations plants in Vienna. The plant was built from 1969 until 1971 for the purpose of thermal utilization of municipal waste and household-type commercial waste as well as energy supply of the new General Hospital Vienna two kilometres away via district heating. The plant was equipped with two hot-water boilers to ensure heat supply at all times. Although it is located in the town-centre of Vienna its architectural structure did not differ significantly from the traditional plant structure.
Situation and Waste Management Strategy of the Czech Republic and Experience in Planning, Construction and Operation of WtE and SRF Plants
© TK Verlag - Fachverlag für Kreislaufwirtschaft (12/2015)
Waste utilization has the potential of savings in using fossil fuels. In the Czech Republic, three incinerators of municipal waste are operating currently, there are many projects for implementation of others; unfortunately, they usually fail to succeed due to the economic evaluation. Support for the construction of new facilities for thermal treatment of waste is practically non-existent. Apparently, this could be solved through a number of alternative approaches – combined combustion, processing of sorted waste; however, a conceptual solution is still missing. The article aims to present the current situation and potential for the future.
