Plastic Waste Recovery in Spain - Overview of the Market and Applied Technologies

Plastic consumption in different Spanish industrial sectors was 2.840.000 tonnes in 2010 and generated approxomately 2.206.000 tonnes of plastic waste in 2010. About 23% of this waste was recycled and 17% recovered, being landfilled about 60% [2].

It can be observed, when analysing the distribution of recycled plastics, that low density polyethylene (LDPE) and high density polyethylene (HDPE) are the most recycled polymers. Both plastics represent together 50,44 % of plastic recycling (excluding recycled materials coming from scraps and imports), followed by the Polyethylene Terephthalate (PET), which represents 23,42 %.

Energy recovery, especially through incineration, is the most widely used alternative to take advantage of the energy content of plastic waste. Additionally, other strategies such as the elaboration of alternative and complementary fuels for cement kilns are increasingly important. Finally, landfilling is still the most common end-of-life option. This situation implies to bury valuable resources.

[2] Recuperación energética en España-Año 2010. Boletín informativo de ANARPLA Nº 2012/5/111, págs.5-7. ANARPLA, 2012.



Copyright: © Thomé-Kozmiensky Verlag GmbH
Quelle: Waste Management, Volume 3 (Oktober 2012)
Seiten: 13
Preis inkl. MwSt.: € 0,00
Autor: Ing. Beatriz Ferreira Pozo
Ing. César Aliaga Baquero
Ing. Juan Luis Martí Arbona
Dr.-Ing. Mercedes Hortal Ramos

Artikel weiterleiten Artikel kostenfrei anzeigen Artikel kommentieren


Diese Fachartikel könnten Sie auch interessieren:

bifa-Text Nr. 57: Die Abfallwirtschaft im Jahr 2030 - Eine Szenarioanalyse nicht nur für Bayern
© bifa Umweltinstitut GmbH (5/2012)
In einer neuen Studie des bifa Umweltinstituts werden mögliche Entwicklungen der regionalen, nationalen und internationalen Rahmenbedingungen für die bayerische Abfallwirtschaft im Jahr 2030 dargestellt sowie deren Auswirkungen auf die Abfallwirtschaftsstrukturen und auf die Ökoeffizienz. Das Projekt wurde im Auftrag des Bayerischen Staatsministeriums für Umwelt und Gesundheit durchgeführt. Die Ergebnisse bieten auch anderen Behörden, Unternehmen und Verbänden in Deutschland eine Basis für die eigene Positionierung und Strategieentwicklung.

Challenges of Mixed Plastics Recovery from MSW Sources in the United Kingdom
© Thomé-Kozmiensky Verlag GmbH (10/2012)
Part of the integrated waste management approach in the United Kingdom is a mechanical pre-treatment of MSW prior to either EfW (Energy from Waste) or AD (Anaerobic Digestion). As a consequence of the pre-treatment some unwanted material is being separated form the primary target material, and in most cases this material contains some valuable sub grades. One of these sub grades is mixed plastic. The amount and quality of recoverable mixed plastics within MSW depends firstly on the collection and transfer and storage scheme prior to the mechanical pre-treamtent and secondly on the consumer and education from the Local Authority who is ultimately responsible for the local or regional waste management strategy and education.

Wertstoffhof 2020 - Neuorientierung von Wertstoffhöfen
© ia GmbH - Wissensmanagement und Ingenieurleistungen (4/2015)
Im Jahr 2014, zwanzig Jahre nach dem durch das Bayerische Staatsministerium für Landesentwicklung und Umweltfragen organisierten Wettbewerb „Der vorbildliche Wertstoffhof“, ist es sicher angebracht, sich dem Thema erneut zuzuwenden. Was ist aus den prämierten Wertstoffhöfen der Preisträger in den jeweiligen Clustern geworden? Wie hat sich das System grundsätzlich entwickelt? Wo geht es hin, wenn man die gesellschaftlichen Anforderungen aus demografischer Entwicklung, Ressourcenschutz und Klimarelevanz betrachtet?

Fields of Research in Optical Sorting of Different Types of Waste
© Thomé-Kozmiensky Verlag GmbH (10/2012)
Optical sorting appeared for the first time in 1994 in Germany, France and in the USA. Initially, it was limited to the recognition of the main packaging types, as found in the "yellow bin", using the NIR spectroscopy to differentiate molecular bonds: PET, HDPE, PVC, Tetrapak were the main targets. Colour sorting was later introduced for very fine colour nuances (e.g. clear vs light blue bottles). Today, most MRFs in Europe use Optical Sorting for packaging.

Post-Consumer Plastic Packaging Waste - How to Increase the Yield and Reduce the Cost
© Thomé-Kozmiensky Verlag GmbH (10/2012)
Recycling schemes for post-consumer plastic packaging waste are politically motivated, create environmental benefits for the society and increase the business costs in general. These recycling schemes are shaped by the local presence of converting industries that are able to use the recyclates as raw materials. Choices for recycling schemes should therefore be based on the expected compliance, efficiency (the lowest environmental impacts for the least costs) and the present local industry.

Name:

Passwort:

 Angemeldet bleiben

Passwort vergessen?